Clinical Laboratory, pH Indicators
pH Test Strip Cardinal Health™ 0 to 14.0 785843 – P1119-1C 785843 – P1119-1C
Availability:
In stock
- 1.0 sensitivity – 4 test fields
- The dyes on these pH indicator strips, in contrast to conventional indicator papers, are substantively bound to the cellulose fibers
- Indicator dyes will not contaminate samples and colors will not run into each other
- 6 x 5mm indicator papers are sealed on a 6 x 85mm plastic strip
- Strips are sufficiently long to avoid contact between fingers and test sample
$20.73
Based on 0 reviews
Be the first to review “pH Test Strip Cardinal Health™ 0 to 14.0 785843 – P1119-1C 785843 – P1119-1C”
You must be logged in to post a review.
Related products
-
Clinical Laboratory, Specimen Collection
Specimen Container McKesson Polypropylene 120 mL (4 oz.) Screw Cap Sterile Inside Only 870203 – 569 870203 – 569
Clinical Laboratory, Specimen CollectionSpecimen Container McKesson Polypropylene 120 mL (4 oz.) Screw Cap Sterile Inside Only 870203 – 569 870203 – 569
- McKesson Sterile Specimen Container
- Sterile inner surface only
- Ounces (1/2 to 4 @ 1/4 oz); cc (20 to 120 @ 10 cc)
- Translucent Polypropylene Base, Polyethylene Lid
- Leak-resistant, screw-on lid
- Container is marked in 10cc (ml) and 0.25 ounce increments up to 120cc
- Single Patient Use
- Not Made with Natural Rubber Latex
- Packaged: 100 Per Case
SKU: 870203 -
Clinical Laboratory, Clinical Analyzer Calibrators & Reagents
Reagent i-STAT® Chem8+ Renal / General Chemistry Sodium / Potassium / Chloride / Ionized Calcium / Urea Nitrogen / Glucose / Creatinine / Hematocrit / TCO2 For use with i-STAT1 System 9 Tests 25 Cartridges 1166840 – 09P31-26 1166840 – 09P31-26
Clinical Laboratory, Clinical Analyzer Calibrators & ReagentsReagent i-STAT® Chem8+ Renal / General Chemistry Sodium / Potassium / Chloride / Ionized Calcium / Urea Nitrogen / Glucose / Creatinine / Hematocrit / TCO2 For use with i-STAT1 System 9 Tests 25 Cartridges 1166840 – 09P31-26 1166840 – 09P31-26
- The i-STAT CHEM8+ cartridge with the i-STAT 1 System is intended for use in arterial or venous whole blood in point of care or clinical laboratory settings
- Each i-STAT single-use cartridge uses advanced biosensor technology that applies microfluidics to process the most comprehensive range of clinical tests in a single platform, allowing clinicians to access the time-sensitive diagnostic information they need
- To perform a test, 2 to 3 drops of blood are applied to a cartridge, which is then inserted into the i-STAT handheld
- Prior to running a test, each cartridge initiates a series of preset quality control diagnostics, from monitoring the quality of the sample to validating the reagent
- Each test cartridge contains chemically sensitive biosensors on a silicon chip that are configured to perform specific tests
SKU: 1166840
There are no reviews yet.